• Erbium Doped Fiber Amplifier (EDFA)
    Erbium Doped Fiber Amplifier (EDFA)
    Erbium-doped fiber amplifier (EDFA) uses Erbium ion as medium to realize energy conversion. The working wavelength window of energy amplification is 1550 nm and the width is 50 am, which coincides with the low loss window of optical fiber. The energy injection window is 980 nm and 1480 nm.
    2019-01-20
  • What is TDLAS
    What is TDLAS
    TDLAS is the abbreviation of Tunable Diode Laser Absorption Spectroscopy.
    2019-01-20
  • Principle of laser gas detection
    Principle of laser gas detection
    TDLAS technology is essentially a spectral absorption technology. The concentration of gas can be obtained by analyzing the selective absorption of laser by gas. It differs from traditional infrared absorption technology in that the spectral width of semiconductor lasers is much smaller than that of gas absorption lines.
    2019-01-16
  • Measurement of narrow linewidth for laser diode
    Measurement of narrow linewidth for laser diode
    Although both spectrum and spectrum are electromagnetic spectra, the analysis methods and testing instruments of spectrum and spectrum are quite different because of the difference of frequency. Some problems are difficult to solve in the optical domain, but it is easier to solve them by frequency conversion to the electrical domain.
    2019-01-16
  • DFB Laser diode
    DFB Laser diode
    DFB: Distributed Feedback Laser.
    2019-01-16
  • LAN and plastic fiber media
    LAN and plastic fiber media
    Local Area Network (LAN) refers to a group of computers interconnected by multiple computers and other devices in a certain area. They are physically apart from each other to allow users to communicate with each other and share such as printers and storage. A system in which computing resources such as devices are interconnected.
    2018-12-11
  • Solution for poor quality cutting of fiber laser cutting machine
    Solution for poor quality cutting of fiber laser cutting machine
    The parameters affecting the cutting quality are: cutting height, cutting nozzle model, focus position, cutting power, cutting frequency, cutting duty ratio, cutting pressure and cutting speed. Hardware conditions include: protective lens, gas purity, sheet quality, focusing mirror and collimating mirror.
    2018-12-06
  • Optical fiber sensor network structure
    Optical fiber sensor network structure
    Fiber optic sensor networks have three basic components, one of which is called a single point sensor. One fiber only serves as a transmission here, and the other is a multi-point sensor, where a fiber bundles many sensors so that many sensors can share the light source for network monitoring. Then there is the smart fiber sensor. The multi-point fiber optic sensor is a grating...
    2018-12-03
1234567891011121314151617181920212223